Polymer Industries' Densetec® HMW is the extruded material needed when Densetec® HDPE is not enough and Polyslick® UHMW is not necessary. Densetec® HMW has higher impact strength than HDPE and is more abrasion resistant. The fact that Densetec® HMW is more wear resistant than standard HDPE, and is more economical than standard UHMW makes it the ideal material for wear applications and machined parts. It may also be used in applications such as snowplow linings and fertilizer spreaders.
Features
Applications
Sizes
Colors
Finishes
Noise reduction
Low temp properties
Good sliding qualities
Stress crack resistant
RoHS & REACH compliant
Moisture resistant
Low coef of friction
High impact strength
Excellent wear resistance
Excellent chemical resistance
Bins
Hoppers
Ice Rink Floors
Reclaim Hoppers
Wear Applications
Chutes
Conveyors
Silo Liners
Truck Liners
Vibratory Feed Pans
Scrapers
Dock Fenders
Snow Plow Liners
Fertilizer Spreaders
Various Machine Parts
STANDARD:
Extruded
inch / mm
Thickness
0.03 - 1 / 0.8 - 25
Sheet Size
48 x 96 / 1220 x 2440
48 x 120 / 1220 x 3050
CAPABILITIES:
Extruded
inch / mm
Thickness
0.03 - 1.25 / 0.8 - 32
Width
45 - 144 / 1140 - 3655
Length
Up to 480 / 12200
Compression Molded
inch / mm
Thickness
0.5 - 4 / 12.7 - 100
Width
48 - 96 / 1220 - 2440
Length
Up to 240 / 6100
White
Black
*Natural
*FDA approved colors
Standard extruded finish
Smooth
Standard compression molded finish
Planed
Note: Other sizes, colors, formulations and forming grade available upon request
